RO Plant

RO Water Maker is a purifier system that uses the principle of reverse osmosis to remove 95-99% of all the mineral and chemical contaminants from raw tap water. R.O. gives you the quality of water.

The membrane consists of several thin layers or sheets of film that are bonded together and rolled in a spiral configuration around a plastic tube. (This is also known as a thin film composite or TFC membrane) The material of the membrane is semi-permeable with .0001 micron pores. It allows water molecules pass through while acting as a barrier to dissolved solids (i.e.: mineral chemical contaminants). When the feed water stream passes across the surface of the membrane, the molecules penetrate the membrane surface, working their way around the spiral and collecting in the center tube. The remaining contaminants are concentrated and washed from the surface of the membrane down the drain.

"One indication is a gradual reduction is water production caused by a layering of minerals and salts on the membrane surface. Another is gradual deterioration in the quality of water being produced. You my notice a different taste or whiter scrum on the inside of a pan of water you are boiling. This might mean the R.O. membrane is disintegrating and requires replacement. Generally it should change after 3-3.5 year from installation"

It is depended on Case to case. Generally Power consumpation require to run all the pumps.

It is deplended on RO feed water quality and design.

"“Dissolved solids” in water refers to minerals, salts, metals and anions dissolved in water. This includes anything present in water other than suspended solids. (Suspended solids are particles or substances that are neither dissolved nor settled in the water. In simple terms, TDS concentration is the sum of the cations (positively charged) and anions (negatively charged) ions in the water."

"Micron Cartridge Filter and RO Antiscalent chemical are consumable material. Micron Cartridge Filter change every three month and Antisclant yearly uses for 1000 LPH RO Plant @ 50 Kg base on 8 hr. working. "

It is use in utility persose flusing or Gardening. Aslo he put reject water RO plant for this reject water.

Depended on client requirement. We should supply both type manual and automazation plant.

Reverse osmosis systems reject particles down to the size of .0001 microns. A good reverse osmosis system will reject 95%-99% of most feed water contaminants. Industrial reverse osmosis systems typically recover anywhere from 50% to 75% of filtered feed water. So for every 100 gallons filtered, about 50-75 gallons is recovered as product water.

Because they produce great-tasting, very pure water at a reasonable price when compared to buying bottled water, and in a trouble-free, fully automatic format to boot. Committed water drinkers know, not all water tastes the same.

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Optio, neque qui velit. Magni dolorum quidem ipsam eligendi, totam, facilis laudantium cum accusamus ullam voluptatibus commodi numquam, error, est. Ea, consequatur.